LT Box Truss (LT-B)
Compact box truss with a conical connection system
The LT-B truss is a box construction with main chords (47.6 x 3.1 mm) and braces (15.8 x 1.6 mm) with a conical connection system.
Using a solid fixed coupler and taper pin arrangement, the LT-B is easily assembled and is a compact light duty trussing system.
The LT series product is available in triangle and ladder configurations with a complete range of corners and accessories.
Item Codes
| PART CODE | LENGTH (m) | PART DESCRIPTION | UNIT WEIGHT (kg) |
|---|---|---|---|
| TRUSS | |||
| LT-B0.25m | 0.25m | LT Box Truss (complete with 4 x taper pins & R clips) | 3.0 |
| LT-B0.5m | 0.5m | LT Box Truss (complete with 4 x taper pins & R clips) | 4.4 |
| LT-B1.0m | 1.0m | LT Box Truss (complete with 4 x taper pins & R clips) | 7.0 |
| LT-B1.5m | 1.5m | LT Box Truss (complete with 4 x taper pins & R clips) | 10.0 |
| LT-B2.0m | 2.0m | LT Box Truss (complete with 4 x taper pins & R clips) | 12.4 |
| LT-B2.5m | 2.5m | LT Box Truss (complete with 4 x taper pins & R clips) | 15.1 |
| LT-B3.0m | 3.0m | LT Box Truss (complete with 4 x taper pins & R clips) | 18.0 |
| LT-B3.5m | 3.5m | LT Box Truss (complete with 4 x taper pins & R clips) | 20.6 |
| LT-B4.0m | 4.0m | LT Box Truss (complete with 4 x taper pins & R clips) | 23.2 |
| CORNERS | |||
| LT-B2C | 2 way corner LT Box Truss | 8.0 | |
| LT-B3C | 3 way corner LT Box Truss - (T Piece) | 10.5 | |
| LT-B3TC | 3 way corner LT Box Truss - (Table Top) | 10.8 | |
| LT-B4C | 4 way corner LT Box Truss | 12.3 | |
| ACCESSORIES | |||
| LT-PUP | LT Pickup Point | 3.8 | |
| LT-TSB | Trade Show Base - 1m square with spigots | 18.0 | |
| LT-BBP | Basic Base Plate - 0.6m square with spigots | 10.0 | |
| LT-TMP | Top Mount Plate - 0.3m square with spigots | 4.0 |
Technical Specifications
Braces - 15.8 x 1.6mm
Main Chord - 47.6 x 3.1mm
Connection Type - Conical
Material - Aluminium 6082 - T6
Supplied in a natural aluminium finish as standard
Powder coating to a specific RAL colour is available at additional cost
OTHER CONFIGURATIONS
- Angled Corners
- Bespoke Lengths
- Circles
- Hinges
- Swivels
Load Table
| TYPE OF LOAD | CLEAR | SPAN | (m) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||
| Uniformly Distributed Load | kN/m | 11.0 | 7.39 | 4.68 | 3.74 | 3.12 | 2.50 | 1.91 | 1.14 | 0.92 | 0.87 | 0.73 | 0.62 | 0.37 | 0.32 | 0.28 |
| Total UDL | kN | 22.20 | 22.00 | 21.00 | 19.50 | 17.80 | 16.00 | 14.00 | 12.00 | 10.25 | 9.00 | 8.00 | 7.00 | 5.75 | 4.80 | 4.50 |
| Single Point Load ( mid point) | kN | 22.20 | 16.50 | 14.00 | 12.24 | 10.45 | 8.74 | 7.10 | 5.50 | 4.60 | 4.10 | 3.60 | 3.15 | 2.70 | 2.40 | 2.25 |
| Two Point Loads (third points) | Each kN | 11.10 | 10.24 | 9.35 | 8.35 | 7.25 | 6.25 | 5.15 | 4.15 | 3.35 | 3.10 | 2.80 | 2.40 | 2.00 | 1.80 | 1.69 |
| Three Point Loads (quarter points) | Each kN | 7.40 | 6.83 | 6.23 | 5.65 | 5.00 | 4.37 | 3.75 | 2.95 | 2.30 | 2.05 | 1.80 | 1.50 | 1.29 | 1.20 | 1.13 |
Notes
1. Above allowable loads may be increased by 1.11 for wind loading only.
2. This table is provided as a guide only and assume all loads are applied at nodes. All scaffolds and structures should be checked by a qualified structural engineer.
3. Maximum capacity of a point load mid way between nodes is 6kN.
4. For design purposes assume: allowable bending moment = 10.0 kNm, allowable shear = 9.50kN.
2. This table is provided as a guide only and assume all loads are applied at nodes. All scaffolds and structures should be checked by a qualified structural engineer.
3. Maximum capacity of a point load mid way between nodes is 6kN.
4. For design purposes assume: allowable bending moment = 10.0 kNm, allowable shear = 9.50kN.